Recently introduced & new products. For new Windows & Doors click - View All or Railroad-Mills-Mainstreet.



#
Product
Description
Cost
#4163

4-Pane Arched Top Window Kit

OD: 1.87"w x 1.68"h
Laser cut from .06" white styrene and acrylic plastic.

$2.50
  

#4212

3-Pane Curved Sash Gothic Window Kit

OD: 1.25"w x 3.75"h
RO: 1.12"w " 3.62"h
Laser cut from .06" white styrene and acrylic plastic. No etching on glass


$4.50
  

#4215

2-Pane Gothic Window Kit

OD: 1.25"w x 3.75"h
RO: 1.12"w " 3.62"h
Laser cut from .06" white styrene and acrylic plastic. This window is like many found in rural churches. No etching on glass


$4.50
 

#4229

3-Lite 4-Panel Door Kit

OD: 2 "w x 5 " h
Assembly required. Can be pre-painted prior final assembly with acrylic (.06). Laser cut from .06" white styrene and acrylic plastic.

Use larger acrylic glass for "knockout pattern"


$ 6.50
  
#4221
Church Steeple

OD: 2.125"w x 6"h
Laser cut from .06" white styrene and acrylic plastic.The kit has slots and tabs to aid alignment during assembly. Instructions Included

$14.95

 

#4204

6-Pane
NO SILL Window

OD: 1.5"w x1.37' h
Laser cut from .06" white styrene and acrylic plastic.


$2.00
 

#4253

Bell Tower Kit - Firehouse, Church & School

OD: 2 1/8"w x 2 3/8' w x 3 1/4"h" wide x 4.5" h x
Kit includes 21 pieces with precut styrene textures - New England Shakes for roof and 6" Clapboard Siding, Made from .06 white styrene, 1/4" x 1/4" uprights and corner angles. Plus 7/8" metal Brass colored bell. Assembly required. Can be pre-painted prior assembly.


$14.20
 

#4242

4/4 Pane Extra Tall Dbl Hung Masonry Window Kit

OD: 1.75" wide x 4.5" h x 3" deep
Laser cut from .06" white styrene and acrylic plastic.


$4.00

#4256

2/2 Pane Dbl hung Curved Masonry Window Kit
OD:1.37"w X 3.87" "h
Laser cut from .06" white styrene and acrylic plastic.
Use larger acrylic glass for "knockout pattern"

$4.00
 

#4257

4" Dbl Flue Chimney Kit

Fully laser engraved brick pattern. 5 collars.
OD: 1.5" wide x 3/4"deep x 4" h
Snaps together


$18.00

#4042

15" Styrene Sluice Extension Kit
for #4031 & #4041

OD:15" long x 2.5" wide
Fits #4041 and # 4031 Slluice Kits. Extension can be coupled with additional #4042s to any length desired. Constructed to snap together and interlocking. Instructions. Requires gluing and painting.
Laser cut from .06" white styrene plastic.


$26.00

#4074

15" Styrene Sluice Extension Kit
for #4174

OD:15" long x 2.5" wide
Fits #4174 The Fitz Waterworks Kit. Includes 2-Bent Trestle on 1/4" x 3/8" styrene timbers.Includes cross-over transition pieces.
Laser cut from .06" white styrene plastic.


$45.00

#4246

Station Master Bay Kit-
8 1/1
windows

This single piece 8-window Station Master Bay kit fits up under the eaves. No additional roofing dormer needed. From P&R RR circa 1880s. Scales to 10' ceilings of the older depots. Figure not included.

Overall size 3.56" w x 5.75" h x 1.25 deep

1:24 Large Scale


$21.50

#4041

2" Styrene
Suice Kit

Kit includes all the sluice details: Flow Control, Side Spill, sluice squares plus 4 sets of brass bolts/nuts for flow control. Side spill can be "either side". There's a customizable end "square" to be drilled to insert you water source tubing. Feautres engraved sides with wooden board design.Fits 2" wide wheels.
16" long -
1:24 Large Scale


$27.00

#4031


2" Easy-Clean, Removable Suice Kit with bents

Kit includes Styrene Sluice #4041 (above) PLUS 2 Bent-trestle with cross member in styrene. Sluice is removable (not attached) for easy cleaning of algae without removing mill or raceway/wheelposts.The bents fit into an "in stream" simplified raceway with smaller wheel post design (complete drawings included).

1:24 Large Scale


$45.00

#4227

30-Lite Enginehouse Doors Kit for K36 & K37

By request, Enginehouse doors show full detail of front and back side of doors. OAW 7.5" with OAH 9.75". ncludes 18 sets of brass bolts, washers and nuts. .06 styrene and .060 acrylic. Laser engraved. Scale 1:20.3/Fn3

Custom made with each order allow 1 week.


$ 40.00/pair

#4040

Fitz 2x8 Overshot Waterwheel Kit

Here's the famous Fitz Metal wheel that claimed 90% efficiency with curved paddles. Used on the majority of mills and other businesses powered by water. 24 paddles, brass bushing with 6" solid brass axle and assembled with 32 sets of brass screws and bolts. Wheel is laser cut from .060 whie styrene.Spokes set off from wheel.Wheel matches all 2" sluices.
Video instructions for new hub:
Wheel Assembly


$ 55.00

#4241


Opening Firehouse Doors Kit

This 12-lite door opens and has details on the inside. Included are 8 sets of brass bolts and nuts, and handles.
Rough Opening: 5.5"w x 5.75"h
Scale size is a 10' wide firehouse door.
white styrene and acrylic.


$ 14.30

#4263

1-over-1
Dbl Hung Window Kit

OD: 1.7"w x 2.7" h
RO: 1.562 w " 3.56"h
Laser cut from .06" white styrene and acrylic plastic.

Use larger acrylic glass for "knockout pattern"



$4.00

#4269

Porch Railing: 2-Story Modular

OD: 5"w x 11.6"h" wide
Kit includes single output in .060 styrene
Includes 1/4" x 1/4" uprights post plus joiner for modular construction. Assembly required.


$11.00

#4268

(Piazza) Porch Railing:
with steps

OD: 9.8"w x 3.5"deep x 8.6" h
Kit includes three 2-story single-piece railings and 3 sets of steps, 6 - 1/4" x 1/4" styrene posts, 10 facia trims, 2 corner strips.Assembly required.



$24.00

Return to Home Page