Stone & Cement Tools: Quikrete® Vinyl Concrete Patcher is great stuff to model with. We have tested many concrete patchers and find that this holds detail when cast with texture forms, can be thinned to fill between stones so it appears as mortar, is tough when cured, feathers easily to 1/16" of an inch and contains Portland Cement and NO Gypsum (so it won't deteriorate or require sealing). The "Patcher," the 1/2" hardware cloth (19 gauge wire) and WD40 are inexpensive. Most are found at your local building center. The "Stone Nippers" are ceramic tile nippers and you probably already have a pair in your shop.

Product (top to bottom)
Stone Nippers
Tungsten tipped. For "cutting" and shaping stone
(Ceramic Tile Nippers)
$ 17.95
Small 5" Trowel
for striking off forms and mixing concrete
$ 13.95

Miniature trowel/Knife Set

Set of six tools for sculpting and shapping.
$ 12.50
2" Metal Spring Clamps (4) These clamps work great for gluing doors and windows together. They have rubber tips and handles. Colors may vary.
$ 3.00
Microbrush 5-extra Fine 1mm
& 5-Fine 2mm
for precise application of Adhesives, Paints and solvents
$ 2.00
Microbrush 10-Small 3mm
Colors may vary.
$ 2.00
Microbrush 10-Fine 2mm
Colors may vary.
$ 2.00
Microbrush 10- extra Fine 1mm
Colors may vary.
$ 2.00

Casting Corner Trim
White Styrene 1/4" x 1/4" x 15" For use with clapboards, Lap & Plank sidings. Includes full instructions.

$ 10.50

Reusable Formwork Kit
Due to material and shipping increases, we can no longer offer free shipping on this item.
Includes: 18 1/2" x 18 1/2" x 1" pre-assembled formwork base; foamboard in 1/2" and 1" for damwork; Casting Master sheet #5008; 100 nickle-plated steel quilter's pins; Instruction sheet.
(for those who can't find pink or blue insulating foam in AZ & CA)
$ 35.00